Date:         Sat, 6 Dec 2003 21:10:59 -0800
Reply-To:     mortimer peaberry <cafeugly@PACBELL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mortimer peaberry <cafeugly@PACBELL.NET>
Subject:      Re: tire chains: cable vs chain
Content-Type: text/plain; charset=US-ASCII; format=flowed

The best way I know to put on chains/cables is to have one or two 2x6
cut to fit in the space between the links.
lay the chains down on the ground, and place a block in between the
links, 1/3 or 1/4 from the end - then drive forward (backward) until
your vehicle is setting on the block. Now you can bring the chain over
and adjust it, tighten it and make sure it is good and then after you
drive off the block you can do the other (don't leave your blocks). the
chain has nothing on it so you can get it real tight THE FIRST TIME
(WOW).
Try it in your driveway - I think you'll like this method.
steve volk
87 westy
01 subie
santa cruz