on 20/12/03 4:21 pm, Gurjeet Saund wrote: > I have a flex arm on which the rollers are worn off and it keeps > coming off the rails in the skylight. I have unsuccessfully tried > to 'superglue' a couple of shirt buttons to the metal rivet holding the > rollers in place, and tried crimping a couple of 1/4 split washers > onto the rivet... (both solutions suggested on the list) but they pop > right off when I raise and lower the skylight.
Terry Kay's solution is linked on this page of my website: http://www.members.shaw.ca/albell/mods.html
Alistair
-- '82 Westy -> diesel converted to gas in '94 albell@uvic.ca http://members.shaw.ca/albell |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.