Hi Ki, Check the ground wires in the headlight harness for continuity and that the grounding point under the main fuse panel is clean, shiny and secure. As the other post suggests, could also be the ignition switch. Easy to check if you have a new or known good switch. Uncover the ignition switch, un-plug the ignition harness from the existing switch and plug the harness into the 'good' switch and use a screw driver to turn the switch to the run position and see if the light work! Good luck Phil Z. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.