Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2003, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 16 Dec 2003 16:13:02 -0800
Reply-To:     Phil Zimmerman <phil.zimmerman@MAIL.CRCN.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Phil Zimmerman <phil.zimmerman@MAIL.CRCN.NET>
Subject:      Re: headlights night working.
Comments: To: Ki <ki@CLOUDFACTORY.ORG>
Content-Type: text/plain; charset="iso-8859-1"


Hi Ki,


Check the ground wires in the headlight harness for continuity and that the
grounding point under the main fuse panel is clean, shiny and secure.
As the other post suggests, could also be the ignition switch.
 Easy to check if you have a new or known good switch. Uncover the ignition
switch, un-plug the ignition harness from the existing switch and plug the
harness into the 'good' switch and use a screw driver to turn the switch to
the run position and see if the light work!
Good luck  Phil Z.
Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.