Bad pilot bearing. When cold there is just enough clearance for the input shaft, (or whats left of it) to work properly. After things get heated up the input shaft in being gulded by what it left of the pilot bearing. This makes the clutch act as if it is dragging. A simple test for this is turnning off the engine. If you can shift fine, with the engine off, this is it! Start taking the transaxle out, or risk damaging it also. ERic Alan wrote: >Anyone have an idea why this happens? Is it a sign the >trans is on its way out? > >My 84 GL 4 speed shifts fine when cold, but after it >warms up, it balks at going into reverse or first >gear. I can get it into those gears, but with great >difficulty. > >Alan C> >84 GL > >__________________________________ >Do you Yahoo!? >New Yahoo! Photos - easier uploading and sharing. >http://photos.yahoo.com/ > > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.