Maybe I'm missing something, but didn't the original post (sorry - it was an excellent post but I don't have access to it at the moment) refer to getting at the motor from OUTSIDE the bus - from/through the air intake vent??? Austin At 12/29/03, you wrote: >In a message dated 12/28/03 10:15:03 PM, danoer1@ECLIPSE.NET writes: > ><< . . . the thought of lubricating the motor without removing the dash is >impossible. It is sealed up and really impossible to get at without >removing the dash . . . >> > >This is a good point. The blower is an overhung design so the outboard >("drive end") bearing is seeing the most loading and abuse. Time and >again, (ETC) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.