Date:         Mon, 5 Jan 2004 20:56:31 -0500
Reply-To:     Joe Federici <joefederici@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Joe Federici <joefederici@EARTHLINK.NET>
Subject:      Bull bar style bumpers
Content-Type: text/plain; charset="us-ascii" ; format="flowed"

There's been some talk lately about bull bars and the different ones
available in the US. After looking at a few offered I decided on a
set from aircooled.net. The difference between these and the others I
looked at were. They have a metal trim plates that cover both the
space between the two bumpers bars and the top so it can be used as a
step. This makes a big difference when your looking at the bumper in
real life rather then in a picture. I found the space on top and
between show too much of the van through it and takes away from the
look. The aircooled.net's bumpers also dip down in the rear for the
plate, nice touch for the cops ;-). Installation isn't that hard and
only two holes need to be drilled for the front bumper. The price was
also less then most and shipping was VERY good. I live in NJ and it
cost around $70.00 for the set.

If anyone would like to see a pic I took some of the front bumper. It
rained most of last weekend and I didn't get a chance to take the
rear.

no kick backs for this just pointing out a nice product. Do what you
want with it.


JFF