>>>Question is- when I go to replace the o ring<when I pull the cooler off, will it puke antifreeze all over?I cant tell from the Bently if this is gonna be a problem- but I would sure like to know before I do it!!! Thanks in advance! Brian>>>>> Messy and dirty like hell, of course coolant and oil (for sure) will be spilled if you unplug the 2 cooler hoses, but like Matthew said, if your are able to get the threaded pipe (like a bolt but with thread at each end) loose, you won't have to detach the 2 small hose, BUT, and i say a big but HERE!!!! Those 2 little coolant hoses, check them carefuly! They are a pain in the butt to reach and are well known for failure. http://www.benplace.com/oil_cooler.htm http://www.benplace.com/engine/water_pump_step56.jpg http://www.benplace.com/engine/cleaning_pump.jpg Cheers. Ben |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.