I have a power steering leak in the rear of my van, but I'm having a hard time determining exactly where it's coming from. Basically, if the van sits for just a couple of hours, a spot appears beneath, so I thought such a big leak would be obvious when I had a helper turn the wheel back/forth. But I couldn't see anything. There is a layer of fluid on the reservoir, the supply/return hoses and the exhaust shield below. It seemed likely that the hose connections were leaking, as there was particular build-up there. But then, there's also fluid on the TOP of the reservoir itself, which I'm guessing means fluid is leaking out of the cap... Or spraying on it somehow? Additionally, some of the other PS hoses (coming off the pump) have slight fluid residue at the connections as well. It's as if the pressure is squeezing out fluid wherever it can?! Again, there were no noticeable leaks when I had someone crank the wheel to the side. Anyway, I'm wondering whether I should go ahead and replace the reservoir or if there's perhaps another problem. Thanks, all, once again. James 90 Carat |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.