There's no need to remove the one center bolt simply to remove the fan. That center bolt holds the fan hub to the crank. --------------------------------------------------------------- Tom Young '81 Vanagon Lafayette, CA 94549 '82 Westfalia --------------------------------------------------------------- ----- Original Message ----- From: "Stan Wilder" <wilden1-1@SBCGLOBAL.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, January 24, 2004 6:20 PM Subject: Re: fan shroud removal
> There are three perimeter bolts and one center bolt in the fan. > Remove these, bump the fan belt ring with a rubber hammer and it should fall > off in your hands. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.