Date:         Fri, 23 Jan 2004 23:09:19 -0600
Reply-To:     John Rodgers <jh_rodgers@BELLSOUTH.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Rodgers <jh_rodgers@BELLSOUTH.NET>
Subject:      Re: cv joints more questions
Comments: To: Erin Randolph <lexluthier72@YAHOO.COM>
In-Reply-To:  <20040124010800.43409.qmail@web12403.mail.yahoo.com>
Content-Type: text/plain; charset=us-ascii; format=flowed

Erin, something that can happen and will cause vibrations is that some
of the CV bolts may lossesn and back out to one degree or another. This
will cause vibration and worse. BTDT.

Check the security of the bolts by retorquing.

Regards,

John Rodgers
88 GL Driver

Erin Randolph wrote:

>Hello list,
>   First, thx to all who offered suggestions on repack
>and the like.   My only question remains...As i am not
>used to having vibration with a cv issue, what else
>could cause vibration?  As i said, there is no noise
>from the tranny, and it shifts fine.  I recently
>replaced the Tranny clutch and throwout bearing.  The
>vibration only seems to happen when i hear noise
>coming from the passenger side rear cv.
>I just have never heard of any sort of vibration
>coming from the cv.
>              -Erin
>p.s.- Think i will try a few shots of grease with the
>injection needle to try to calm it down.
>
>
>__________________________________
>Do you Yahoo!?
>Yahoo! SiteBuilder - Free web site building tool. Try it!
>http://webhosting.yahoo.com/ps/sb/
>
>
>