Date: Thu, 22 Jan 2004 08:24:31 -0600
Reply-To: Bruce Nadig <motorbruce@HOTMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Bruce Nadig <motorbruce@HOTMAIL.COM>
Subject: Re: porsche cup2 alloys
Content-Type: text/plain; format=flowed
I, too, found the Vanagon adaptors listed in the H&R catalog. Actually
getting those adaptors was another matter. All the vendors I tried turn up
empty. Seems that H&R didn't have any in the country and probably wasn't
going to be bringing any in. Let's fact it, there is a pretty small market
for people wanting to put Porsche wheels on Vanagons. That is why I took
matters into my own hands and manufactured my own adaptors.
For more information, please feel free to contact me.
Cheers,
Bruce
>From: David Johnson <drjohnso@TELUS.NET>
>Reply-To: drjohnso@TELUS.NET
>To: vanagon@GERRY.VANAGON.COM
>Subject: Re: porsche cup2 alloys
>Date: Wed, 21 Jan 2004 20:04:03 -0800
>
>I have found wheel adapters at h&r springs to accomadate porsche 5/130
>(71.6
>CB) for $189/pair. A little more than I would have guessed, but seeing more
>porsche rolling vanagons is wetting my appetite. Would 7 1/2x17" inch front
>and 9X17" rears have clearence problems? i forgot how amazing this list is,
>its been a while since I've been on the list... feels good to have such
>vast
>group of like minded people a click away... thanks for the help.
>
>David Johnson
>84 Westy
>Vanderhoof BC Canada
>
>Quoting Bruce Nadig <motorbruce@hotmail.com>:
>
> >
> > David,
> >
> > It is late and I haven't had dinner yet. I'll give you a more complete
> > answer in the morning. In the mean time ponder these two things. First,
>I
> > can manufacture and sell adaptors to mount Porsche wheels on a Vanagon.
> > Next, check out my '87 GL with 2001 Boxster S wheels.
> >
> > More tomorrow.
> >
> > Cheers,
> > Bruce
> >
> > >From: David Johnson <drjohnso@TELUS.NET>
> > >Reply-To: drjohnso@TELUS.NET
> > >To: vanagon@GERRY.VANAGON.COM
> > >Subject: porsche cup2 alloys
> > >Date: Wed, 21 Jan 2004 17:35:18 -0800
> > >
> > >Hello... all
> > >
> > >I have been thinkin/dreaming of putting 17 inch porsche rims on my 84
> > >Westfalia. Any list members done this? Is machine work and/or spacers
> > >required to make em fit? I recall somewhere that the sliding door
> > clearence
> > >may be an issue if too wide a tire/rim is used. Clearence for full
> > steering
> > >rotation? What about load rating/sidewall issues using car tires, if
>they
> > >are
> > >low profile? any and all info appreciated... I am currently searching
>for
> > >wrecker porsche cup 2 alloys, ideas, sources, alternatives...
> > >
> > >David Johnson
> > >84 Westfalia
> > >Vanderhoof BC Canada
> >
> > _________________________________________________________________
> > Let the new MSN Premium Internet Software make the most of your
>high-speed
> > experience. http://join.msn.com/?pgmarket=en-us&page=byoa/prem&ST=1
> >
_________________________________________________________________
High-speed users—be more efficient online with the new MSN Premium Internet
Software. http://join.msn.com/?pgmarket=en-us&page=byoa/prem&ST=1
|