In a message dated 1/27/04 1:51:42 AM, skip@SKIPEMMERT.COM writes: << . . . it has been an absolute given that the van won't start once it's been on the highway. The relay was installed with the new starter just over six months ago. I don't know if the solenoid was replaced at the same time. . . . Skip Emmert-Keaton 1980 Westy <Ziegelstein> >> It would be a rarity for a new starter not to have a new solenoid hanging on its side. Was a new starter bushing installed in the case? If this van is an air-cooled, are you sure the pistons aren't seizing once heat soak has taken its toll after a blast down the highway? One easy thing to try which can't hurt is to install a heavy gauge grounding bond (jumper) from one of the starter mounting bolts to the chassis. I've never had to do it myself, but it seems to have its advocates. George |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.