Date:         Wed, 28 Jan 2004 16:47:53 -0800
Reply-To:     jon <jon@KENNEKE.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         jon <jon@KENNEKE.COM>
Subject:      Re: [WetWesties] Brake lights don't work
Comments: To: Aristotle Sagan <killer_jupiter@hotmail.com>
In-Reply-To:  <BAY10-DAV57Pj1ueO9Q00033e01@hotmail.com>
Content-Type: TEXT/PLAIN; charset=US-ASCII

Actually, I'll tell the story of how I got them out, since it was not
soooo bad:

I just used a box end wrench at various angles, and turning it 180 every
now and then (most box ends are angled, so one angle works better than
the other). A little at a time, since those dash support "struts" are in
the way. Took about 5 minutes to remove both of them.

I was just going to replace one, but decided to "do it right". (for once)
:-)

Jon

On Wed, 28 Jan 2004, Aristotle Sagan wrote:

> Of course BOTH were bad. One went bad, then the other. They are in
> parrallel.
>
> Of course, some people only replace one because the other one is a PITA to
> get out.
>
>
> tim in san jose
>
>
> Subject: Re: [WetWesties] Brake lights don't work
>
>
> > Just to let everyone know what the problem was (I hopefully help out
> > someone in the future with this problem):
> >
> > BOTH of the "stoplight switches" were bad. Good thing they are stocked at
> > most FLAPS. Intersting thing is some FLAPS were charging $15.00 for the
> > part, and others $5.00. Go figure.
> >
> > Jon
> >
>

--
Jon Kenneke, General Manager
Kenneke Communications - http://www.kenneke.com
PO Box 3126 - Albany, OR 97321-0702
Radio Takena KTK - http://www.radiotakena.org