Date: Sat, 31 Jan 2004 19:53:44 -0500
Reply-To: EMZ <vw4x4@FYI.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: EMZ <vw4x4@FYI.NET>
Subject: Re: Stupid Question of the Day - Brake Drums?
In-Reply-To: <Sea2-F21fC4WrWNBr3u0004d600@hotmail.com>
Content-Type: TEXT/PLAIN; charset=US-ASCII
I would be very concerned about this method. I have had many bent
brake drums, on vanagon. Why I don't know but just letting them
sit for a few years, and the rear brake end up off center. This
method of removal, may work, but I would beware.
Eric 86-VW4x4
vw4x4@fyi.net 86-SS Syncro
Pittsburgh, PA USA 1936-Chrysler
92-Jetta GWC
www.fyi.net/~vw4x4/vw4x4.htm
On Fri, 30 Jan 2004, Bruce Nadig wrote:
> I'll say it again:
>
> 1) Make sure parking brake is off
> 2) Make sure that the two bolts with the 10mm HEADS are removed
> 3) Try to gently remove drum - if that fails proceed
> 4) Place a jack under the drum, with a block of wood between the drum and
> the jack
> 5) Very gently raise the jack applying light pressure
> Drum should pop right off.
>
> No hammer necessary. I consider this the best method. You won't dent
> anything, and you won't break a sweat.
>
> Cheers,
> Bruce
>
>
> >From: Zoran Mladen <zmaninco@YAHOO.COM>
> >Reply-To: Zoran Mladen <zmaninco@YAHOO.COM>
> >To: vanagon@GERRY.VANAGON.COM
> >Subject: Re: Stupid Question of the Day - Brake Drums?
> >Date: Fri, 30 Jan 2004 12:58:21 -0800
> >
> >No, do not remove the big nut...it will not help.
> >
> >Take a good sized sledge hammer...3 lb or so...and basically beat the heck
> >out of the drum. Pound ii in the flat areas between each of the lugs. And
> >then keep pounding...and then some more. You will see it start to loosen
> >and finally it will come off.
> >
> >You will also have to back off the self adjusters through the hole in the
> >backing plate.
> >
> >Z
> >
> >tabe johnson <xtabe@YAHOO.COM> wrote:
> >Hey Y'all (I'm allowed to say y'all)
> >
> >Time for another.....
> >"Stupid
> >Question of the
> >Day!" (SQD, pat. pend.)
> >
> >
> >
> >How do I pull the rear drums? Tried tapping (OK, hammering) from
> >all sides to no avail. I don't have to remove that huge 462mm nut
> >just to get the drums off, do I?
> >
> >--tabe johnson
> >xtabe@yahoo.com
> >
> >
> >
> >______________________________________________________________________
> >Post your free ad now! http://personals.yahoo.ca
> >
> >---------------------------------
> >Do you Yahoo!?
> >Yahoo! SiteBuilder - Free web site building tool. Try it!
>
> _________________________________________________________________
> Check out the coupons and bargains on MSN Offers!
> http://shopping.msn.com/softcontent/softcontent.aspx?scmId=1418
>
|