Date:         Mon, 2 Feb 2004 15:23:19 -0700
Reply-To:     Ben McCafferty <ben@KBMC.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ben McCafferty <ben@KBMC.NET>
Subject:      Re: Source for GOOD high pressure FI tubing & clamps?
Comments: To: Gerald Masar <azsun99@EARTHLINK.NET>
In-Reply-To:  <00c801c3e9cb$7538de80$9809b83f@computer>
Content-type: text/plain; charset="US-ASCII"

Hi Tabe,
Not sure about dimensions, but I found the urethane line from the Bing
Agency (they make carbs for BMW bikes, among others) through the /5 list,
and it's by far the best fuel line I've ever used.  Period.  It is rated to
something like 80 PSI without clamps.  The only drawback to it is that I've
always had to cut it off, i.e. it pretty much is a one-way trip.  :)
Bing is in Kansas.
tx,
bmc  :)
"Faith will move mountains, but you'd better bring a shovel...."


> From: Gerald Masar <azsun99@EARTHLINK.NET>
> Reply-To: Gerald Masar <azsun99@EARTHLINK.NET>
> Date: Mon, 2 Feb 2004 13:29:37 -0700
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Source for GOOD high pressure FI tubing & clamps?
>
> try Ken at Vanagain.com
>   http://www.vanagain.com/search_result.asp
> ----- Original Message -----
> From: "tabe johnson" <xtabe@YAHOO.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Monday, February 02, 2004 12:10 AM
> Subject: Source for GOOD high pressure FI tubing & clamps?
>
>
>> Thanks for all the sliding door info!  Sounds like my
>> van is more normal than I thought it was!
>>
>> Anyone know where I can get the good kind of high pressure
>> fuel hose to replace the rotting stuff in my engine bay?  I
>> also need the clamps.  I need it to be either available in
>> Canada or shippable here for Not Too Much Money.  Dealer
>> is too pricey.
>>
>> Thanks!
>>
>> --tabe johnson
>> Vancouver BC
>> xtabe@yahoo.com
>>
>>
>> ______________________________________________________________________
>> Post your free ad now! http://personals.yahoo.ca