Date:         Tue, 3 Feb 2004 06:04:36 EST
Reply-To:     RAlanen@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Re: Source for GOOD high pressure FI tubing & clamps?
Comments: cc: xtabe@YAHOO.COM
Content-Type: text/plain; charset="US-ASCII"

In a message dated 02/02/2004 12:09:50 PM Eastern Standard Time,
LISTSERV@GERRY.VANAGON.COM writes:

<<<<Anyone know where I can get the good kind of high  pressure
fuel hose to replace the rotting stuff in my engine bay?   I
also need the clamps.  I need it to be either available in
Canada  or shippable here for Not Too Much Money.  Dealer
is too  pricey.>>>>

Tabe, see my Vanagon Items  Forsale, _http://members.aol.com/Fkc43/sales.htm_
(http://members.aol.com/Fkc43/sales.htm) , webpage  I have the hose and
clamps listed there.  Also, you should be able to find  the hose and clamps at NAPA
if you have one there in Calgary.     Make sure you get the proper fuel hose
clamps with rounded radius edges.   Do not use ordinary screw type hose clamps.

Cheers,

Frank Condelli
Almonte, Ontario, Canada
BusFusion a VW Camper  camping event, Almonte, ON, June 10 ~ 13, 2004
'87 Westy & Lionel  Trains
Member: Vanagon List, LiMBO, IWCCC & CCVWC
Vanagon/Vanagon  Westfalia Service in the Ottawa Valley
STEBRO/Vanagon Stainless Steel  Mufflers
Frank Condelli & Associates or  http://frankcondelli.com