Date:         Sun, 1 Feb 2004 13:13:58 -0800
Reply-To:     Jeffrey Schwaia <jeff@TSSGI.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jeffrey Schwaia <jeff@TSSGI.COM>
Subject:      Re: ECU POWER SUPPLY?
Comments: To: Trvlr2001@AOL.COM
In-Reply-To:  <1e4.18859302.2d4ec2f4@aol.com>
Content-Type: text/plain; charset="us-ascii"

John,

The small black box above the coil has two relays in it.  One relay is for
the fuel pump, the other is the Digifant control unit relay which supplies
power to the ECU, et al.

If you'd like a pdf wiring diagram for your van, send me an email.

Good Luck,

Jeff
www.vanagonparts.com


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of John Carpenter
Sent: Sunday, February 01, 2004 1:01 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: ECU POWER SUPPLY?


Hi All,
I'm not sure which ECU pin is # 14,
but I'm guessing it is at one end or the other,
on the longer row of pins,
that has 14 on it :)
Anywho, no juice on either end of the row of pins.
Do have ground at # 13 though.
Where does the ECU get its power, and how is it fused or relayed?
thanks,
John C.
SLC, UT...
> I still have to check out power to the ECU, it appears!
> Thanks again to everyone for your help & expertise.
> It's just incredible, the bank of knowledge in this list!
> Synergy, for sure!