Date:         Mon, 2 Feb 2004 13:38:44 -0800
Reply-To:     David Marshall <vanagon@VOLKSWAGEN.ORG>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Marshall <vanagon@VOLKSWAGEN.ORG>
Subject:      Re: Metallic brakes
Comments: To: "Greenamyer, William L" <william.l.greenamyer@BOEING.COM>
In-Reply-To:  <DE518E764E760A4681CD017B45FED70A022E23F6@xch-sw-11p.sw.nos.boeing.com>
Content-Type: text/plain; charset="iso-8859-1"

I use the metallic based ones on my vans.  They offer better stopping power
than the organic based ones at the expense of some additional noise (minor)
and a little more brake dust.  I have never experienced vibrations though.

I'd run these a little longer so that they are a perfect worn in match to
the rotor.

David Marshall

Fast Forward Automotive Inc.
4356 Quesnel-Hixon Road
Quesnel BC Canada  V2J 6Z3

http://www.fastforward.ca    mailto:sales@fastforward.ca
Phone: (250) 992 7775        FAX: (250) 992 1160

- Vanagon Accessories and Engine Conversions
- Vanagon, Transporter and Iltis Sales and Importation
- European Lighting for most Volkswagen models


Due to the large volume of email  we  receive,  PLEASE  include  previous
emails when responding.  This will allow us to read the complete dialogue
in one message and will result in quicker and more  accurate  responses.


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Greenamyer, William L
Sent: February 2, 2004 7:16 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Metalic brakes


A while back, my mechanic put new brakes on the van.  Ever since, they have
exhibited vibration problems when stopping.  Seems to be a progressive
problem.  Turns out metalic brake pads  were used (both front and back).
The word I get is that metalic pads can generate heat and leave residue on
the drums/rotors.  The residue builds up and that is what the pads are
hitting when I try to brake.  Questions:

1)  Can metalic brake pads be used on the Vanagon or should I stick with
organic pads?
2)  Could something else be causing the vibration to occur?

Note:  I have been able to reduce the vibration by stomping on the brakes
and not coming to a stop which doesn't generate the sustained heat and wipes
the metal surfaces.  This reduces the vibrations but I still need to know if
there is anything else I can do.

William