Make sure the idle switch on the throttle body is working. It should open just as the throttle is moved off idle. The Bentley manual tells you how to reset it. TEMiller ----- Original Message ----- From: "Dylan Friedman" <insyncro@HOTMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, February 07, 2004 10:06 AM Subject: ECU question
> Hello List, > The patient is an 87 Syncro van, that has some hesitation after warm up. I > have checked the grounds, ICV & ICU, temp sender and the AFM. Still no > change. If I turn off and reset the computer all seems to be fine for a > short period of time, but starts slight hesitation soon after. > > My question is concerning the ECU computer. How often do they good bad? > What is the best way to check it? > > Can I rule out fuel delievery problems because it runs fine after a reboot? > > Thanks > > dylan > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.