I used to have a subwoofer in the rear area behind the back seat in a QLogic box. I got tired of not being able to use it on long trips with the family where the back area was full. I decided to route my amp output (under the passenger seat) to a custom box I made to fit under the rear bench. It is a sealed box made out of MDF that acts as a bandpass when the rear bench is down. The box is custom sized and angled in the back to fit perfectly. Sounds really great! Clean, strong bass that is hidden. I run a mosfet Pioneer head unit to 4 JL Audio 3" two way speakers in the factory slots. Sounds incredible once it is equilized to enhance the midrange. Just my two cents. Here is a link with some pictures http://www.ctsr.com/vanagon/page_01.htm Kurt 87 Wolfy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.