Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (February 2004, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 10 Feb 2004 17:54:34 -0500
Reply-To:     Matt Bennett <matsuwesty@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Matt Bennett <matsuwesty@EARTHLINK.NET>
Subject:      Subject: Steal Wheels?
Comments: To: wrack@comcast.net
Content-type: text/plain; charset=US-ASCII

I've never heard of Eurovan wheels that have an offset of 53mm. I'm not familiar with the offset on the steel wheels, but the alloys usually have an offset of 35mm-45mm. As you probably know, the 2wd Vanagon is 30mm (you mentioned that below) and the Vanagon Syncro is 35mm. The difference between 53mm and 30mm= 0.90551 inches between 53mm and 35mm= 0.70866 inches

Those are some thick spacers and long studs, not that it can't be done, but is it worth it? Where do you find 14mm studs that are long enough for the thickness of the backing plate, the spacer, the wheel, and enough thread to get a nut totally threaded on it. Then you have to think about the stress exerted on the stud over that distance along with the load on the wheel bearings of that wheel. I'm not trying to talk you out of it, it just seems like a bit of a risk and expense for little gain. I hope you got a great deal on those wheels. Good luck with whatever you decide to do. Matt

Subject: Steal Wheels?

I jumped on an opportunity to acquire a set of brand-new, never been mounted 16" "vanagon wheels" for a good price. They turned out to be Eurovan wheels, but they seemed close enough to Vanagon wheels that I bought 'em.

However, the offset is 53 mm (ET 53) compared to the Vanagon's 30mm. Anyone have experience with this situation? Or maybe I should be asking if it is worth it to use spacers, where to get them and the longer bolts needed for a Syncro?

Wheely big thanks,

ron antaki


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.