Make sure it's level and plug it up. You just can't run it on gas without special fittings. You can get the same relay (Hella) from bus depot. It's the same one they sell for battery isolation. Let me know if you need a picture of wired installation, I took one recently. Jim On Feb 13, 2004, at 9:05 PM, Jason Willenbrock wrote: > hey all, > i recently purchased a westy fridge and i want to check its working > order on 120v before i instal it. is it possible to just run it off > an extension cord to any outllet, or do any of these other wires need > to be hooked up to something, actually i am not sure what wires > go where since i never had the fridge installed nor do i have the > westy wiring harness yet. > > follow up question: > i am getting the westy wiring harness hopefully soon from the PO, but > i do not have the fuse box isolator for it located behind the drivers > seat, does any have this or is there a way to make one with a few > trips to radio shack > BTW i am an electrical idiot. the previous owner had cut some wires > so i am not sure where they all go. > help > jason > > Plan your next US getaway to one of the super destinations here. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.