Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2004, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 11 Feb 2004 13:07:50 -0500
Reply-To:     tabe johnson <xtabe@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         tabe johnson <xtabe@YAHOO.COM>
Subject:      Transmission advice; 3/4 slider
Comments: To: eric@CRAFTEDEARTH.COM
Content-Type: text/plain; charset=us-ascii

Hi Eric,

Can you describe your symptoms a bit more? Are you sure it's not just the linkage sticking somewhere?

If I shift into third, then right out without doing anything, it shifts fine. But when I shift into third, release the clutch, apply power, put in the clutch, then try to shift out, I have to pull fairly hard. Is this the same problem you're having? PLEASE don't tell me that I have to replace my tranny too!

If you know the mileage of the used transmission and don't expect to drive your van too many more miles, then that might be the way to go. If you do go rebuilt, make sure a reputable shop does the job.

--tabe johnson xtabe@yahoo.com

-----------------------------------

Date: Wed, 11 Feb 2004 00:17:13 -0800 From: Eric Spletzer <eric@CRAFTEDEARTH.COM> Subject: Transmission advice

Hi All -

I think I have the infamous 3-4 Gear Slider issue and would love some advice on how to proceed.

What happens is that in 3rd gear, I will get stuck unless I shift once to neutral, and then once again to the other gear I'm looking for. It's not completely stuck, but it's sticking more and more and I'm afraid of having it stick for good eventually.

So it sounds to me like I need a new tranny. After shopping around, I see that I have a couple options - a used tranny for about 700, installed, a rebuilt for about 1200. Does anybody know if it's worth getting a used, or am I just delaying the headaches?

Also - how hard is it to install a new transmission. I've done the clutch before, but never the whole tranny?

Any bits of info would be a great help here. Also - anyone have a good used tranny they know has been rebuilt for sale?

-eric ----- Eric Spletzer '85 Vanagon GL Westfalia

______________________________________________________________________ Post your free ad now! http://personals.yahoo.ca


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.