Date:         Sat, 14 Feb 2004 19:45:29 EST
Reply-To:     BenTbtstr8@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ben T <BenTbtstr8@AOL.COM>
Subject:      Re: Carat Interior Conversion HELP
Comments: To: meyra21@YAHOO.COM
Content-Type: text/plain; charset="US-ASCII"

In a message dated 2/14/2004 4:38:56 PM Pacific Standard Time,
meyra21@YAHOO.COM writes:

Am I missing something?  I know people have done this before, what is the
trick??
Tom,

There is a J-channel which you rivet or screw in to the wall. The bottom ones
are screwed into place with small sheetmetal screws. There is a small metal
bracket that also attaches to the edge closest to the rear of the sliding door
to keep that panel from collapsing.

Don't forget to get the bench/bed metal extensions when installing the
narrower Carat bench/bed. Those big square brackets are screwed into the wall.

BenT