Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2004, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 11 Feb 2004 13:46:05 -0800
Reply-To:     "Mike D." <md03@XOCHI.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Mike D." <md03@XOCHI.COM>
Subject:      Set Timing: Digijet w/ Automatic
Content-Type: text/plain; charset="us-ascii" ; format="flowed"

I have a Bently, but am a little unclear on the proper procedure for setting the timing on my 85 Westy (automatic), would appreciate advice:

As I understand it, first I bypass the idle stablizer, then set the timing (to 5 atdc as per bently, or 5btdc as per list wisdom), then set the idle to about 850 using the idle adjuster screw.

Question: for this first step, should the engine be cold or hot?

Then I reconnect the idle stabilizer. Here is where I get confused:

With my old stabilizer, the timing would jump 10 degrees advanced and the idle would speed up (I'm assuming that it's broken and I've bought a new one to try).

So with the new (hopefully working) idle stabilizer, do I then: reset the timing? or set the idle speed with the screw? or both or neither : it should just work.

Thanks!


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.