It shows how to do this in the Bentley but basically after you get done unhooking everything you twist the regulator and cables until they becomes a straight line and then pull it out of the hole near the bottom of the panel. It is easy once you do it one time. Thanks, Ken Wilford John 3:16 http://www.vanagain.com http://www.strictlyvwauctions.com http://www.eurovan.org http://www.vwcabrio.org Phone: (856)-327-4936 Fax: (856)-327-2242 -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of HOTZE, BRETT C [AG/1000] Sent: Wednesday, February 18, 2004 10:32 AM To: vanagon@GERRY.VANAGON.COM Subject: Removing the Power Window Guts for repair
Any help on how to remove the internal works for a 90 Vanagon Carat power front window system would be greatly appreciated. I have pulled the door panel and released the window from the glide and removed the nuts and bolts that hold the system in, is there some sort of trick to pull the system out through the openings in the door frame? /Brett |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.