The control cables tend to bend and distort if they have too much resistance. The adjustments are often critical to get the right combination. You should be able to see bent / damaged cables down through the ashtray opening or down through the instrument area after the cover is removed. The adjustments are on both the slider control and on the air flow control box under your dash. You'll need to remove the glove box to get to some of the cable adjustments. Stan Wilder
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf Of Adam B Sent: Wednesday, February 25, 2004 4:25 PM To: vanagon@GERRY.VANAGON.COM Subject: heat slider switch
Hey, The slider switch for my heat control seems to be stuck. I can slide it to one end and the other, but it pops back to the middle. Any ideas what i can do to loosen it up? How do I get in there? Thanks Adam 86 Vanagon GL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.