Date:         Mon, 23 Feb 2004 19:55:33 -0500
Reply-To:     Mark Cumnock <kayakwesty@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mark Cumnock <kayakwesty@YAHOO.COM>
Subject:      Re: 85 Camper Wolf 3 point seatbelt question

To start the installation , on the passenger side , while looking at there
picture, , you can pull back the cover and see the factory mounting hole,
I used a unibit to drill the hole through the cover, then you can use
this , to get you measurement for the drivers side.. plan a saturday so
you won't be in a hurry

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.