Date:         Fri, 27 Feb 2004 15:24:00 -0800
Reply-To:     TJ Hannink <tjhannink@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         TJ Hannink <tjhannink@YAHOO.COM>
Subject:      Re: Clutch Pedal Funk - Worn Pedal/Clevis Linkage
Comments: To: James V <tornadored@earthlink.net>
In-Reply-To:  <BC650709.B7F9%tornadored@earthlink.net>
Content-Type: text/plain; charset=us-ascii

I got the bushing from my local electronics surplus store. A real hardware store (not HD or Lowes) will probably have a selection of them.

I found the shouldered bolt in my stash of spare hardware. Again, a real hardware store should have something that will work.

Good luck,

Tim



James V <tornadored@earthlink.net> wrote:
On 2/27/04 4:15, "TJ Hannink" wrote:

> I ended up enlarging the
> hole on the pedal and fitting an oil-less bronze bushing in its place, then
> using a shouldered bolt instead of the pivot pin. You can also weld the hole

Where might I find this type of hardware? Are these special machine parts
or off-the-shelf HD/Lowes fare?

Thanks,

James
90 Carat


TJ Hannink
Goldibox - 1987 Vanagon Camper, Wolfsburg Edition
Winter Park, Florida
http://home.earthlink.net/~tjhannink/
http://groups.yahoo.com/group/wolfsburg_campers
http://photos.yahoo.com/tjhannink [Vanagon] Album

---------------------------------
Do you Yahoo!?
Get better spam protection with Yahoo! Mail