Jeff, The part #'s are: AKD 456 000 02, Engine Sealant (Yellow stuff) D 000 400 01, Engine Sealant (Black stuff) They run about $6 each. Cheers, Jeff www.vanagonparts.com
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf Of Jeff Engel Sent: Tuesday, March 02, 2004 5:40 PM To: vanagon@GERRY.VANAGON.COM Subject: head gaskets
Hello all: Am presently rebuilding a 2.1 out of a 1990 westy and am at the head install stage. Bently calls for 2 different sealants when installing cyl. heads.I found one of them thru the part # in Bently and it looks to be like regular old black silicon. This was the sealant that you put on the cyl head gasket. The other sealant with a bently part # that starts with AKD and a bunch of digits mainly zeros wasn't a good part number according to my VW dealer.Does anyone know what this sealant is that you put on the sealing surface of the cyl head cap nuts. ( 8 on each head.) I'm thinking maybe some type of antiseize lub but am not sure. Thanks in advance for any help or suggestions. Jeff 1990 Westy under repair |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.