In a message dated 3/4/04 12:39:11 PM Eastern Standard Time, damoncampbellvw@YAHOO.COM writes:
> , but the > one that goes across the front and seals to the > luggage rack is worse that original (for me - much > worse... didn't seal at all). here is a heads up.. NEVER remove the factory seal that goes between the poptop and luggage rack.. because NOBODY makes a good aftermarket seal for that area. just replace the seal that runs around the perimeter of the top/luggage rack, where it touches the roof (perimeter seal). when removing your old perimeter seal, cut it at the base of the part where it starts going up (rack/top seal) with some wire cutters/razor blade and leave the old rack/top seal there. even a old dried out rack/top seal is better than the aftermarket one, in that area. chris |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.