not so fast. the centerline of front wheels moves down relative to van as weight is removed and shifted to frame. dlk >Forget the degrees, for this purpose they will only cause an inaccuracy. >Here is simple: > >The wheelbase of a van is close enough to call it 8 feet. The front >crossmember is more or less on the vertical centerline of the front wheels. The front >crossmember has to come up about 1 1/2 feet. When jacking up the front, the >van pivots about the rear axle. So . . . the horizontal centerline of the >front wheel has to be at an elevation 1 1/2 feet higher than that of the rear >wheel. Or, the van has to be on a 3 in 16 gradient. > >George |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.