Hi Everyone, Well its cold and rainy here in VT and the damn bus just started stumbling. Here's the deal it starts right up and runs fine and then after about a min or 2 it starts stumbling skiping coughing it does not die but won't run under load stays at about 900rpm. It has a new splice on oxy sensor I'm thinking a bad splice. If I want to run it for a few hours with no oxy sensor to test do I unplug the big plug and the little spade one or just the big one? Thanks and Happy Friday Kevin 87 Westy Burlington Vt |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.