http://members.shaw.ca/stuartblack/vwprojec.htm surf thru there and see if that helps. Bob
----- Original Message ----- From: "Westyman" <syncrowestytd@MINDSPRING.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Wednesday, March 03, 2004 11:08 AM Subject: Cutting hole in Vanagon roof
> I have a not-so-nice Vanagon that I'd like to experiment with, by cutting > a > hole in the roof for the addition of a camper top. I'm sure others here > may > have done this, and would be interested in knowing how the metal was > finished off around the hole, braced or strengthened, and blended to the > headliner, pitfalls to avoid, etc. All comments appreciated. > > Karl > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.