In a message dated 2/29/04 5:13:03 PM, rcharrette@HOTMAIL.COM writes: << . . .So I was thinking about just cutting through it at the leak and slipping a rubber hose (radiator hose) in between to rejoin it. 2 Question are: I this a good Idea? I don't see why not myself. Also, what diameter hose do I need to get? >> Once you cut the coolant pipe you'll know the diameter. Anyway, I THINK it is 32 mm (approximately 1 1/4"). One thing to keep in mind: a metal bushing is inserted into the ends of the plastic coolant lines where the rubber hoses attach. I don't know how this will effect your planned repair, but I do know that whenever a joint in plastic tubing is made with a compression fitting a metal bushing is required. George |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.