Date: Sat, 6 Mar 2004 23:13:47 -0800
Reply-To: vanagon <vanagon@ASTOUND.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: vanagon <vanagon@ASTOUND.NET>
Subject: Re: Water in interior panel by slider
Content-Type: text/plain; charset="iso-8859-1"
I am not sure where it is coming from, one poster said check the rear wiper
fluid which I did and its topped off no leak there. the water seemed to be
rain water and not coolant but it might still be, because I noticed I had
coolant under the mattng near the heater so my core or hose is leaking. I
intend to pull the rear core and re-purge the sytem, the factory way as soon
as I get some other stuff done. The only other place it can get in is the
side window. the rest of the body and roof are sealed.
I am looking for a set of 88 on rear quarter windows with the chrome - less
weather stripping to update my 87 Syncro with if anybody has a set cheap
please let me know.
When I do pull the windows out I will look and see if there is a leak, I am
thinking there is.
Also there should be a drain hole in the bottom of that thang. jeez 3
inches of water rollng around in your body metal is great for rusting out
your rig.
Doug
----- Original Message -----
From: "Jere Hawn" <jbrschawn@earthlink.net>
To: "'vanagon'" <vanagon@astound.net>; <vanagon@GERRY.VANAGON.COM>
Sent: Saturday, March 06, 2004 10:11 PM
Subject: RE: Water in interior panel by slider
> Doug,
>
> I've got the same problem. Today when I was changing the rear heater core
I
> discovered the same thing. I do not know where it is coming from. I
> suspect that it comes from the sliding door latch bolt holes but I'm not
> sure. If you find out please let me know.
>
> Thanks
> Jere
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> vanagon
> Sent: Saturday, March 06, 2004 2:04 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Water in interior panel by slider
>
> Hi all,
> I pulled my back bench seat out and the angled interior panels out and
began
> vacuuming and found almost 3 inches of standing water in the interior
panel
> by the slider. This is below the passenger side rear quarter window which
> must be leaking around the seal? I know there is factory was sprayed down
> in there but apparently it holds water with no small drainage? where can
I
> drill from underneath to let the water out. It seems lower toward the
> front.
>
> Anybody else run into this?
>
> That darn rust behind the window seals is a bugger, I've got it on the
> windshield of my 85 too. leaks to the passenger foot well when it rains
> hard.
>
> Thanks,
>
> Doug
>
|