F From: "John Connolly, Aircooled.Net" <john@AIRCOOLED.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, March 13, 2004 5:45 PM Subject: Re: [VANAGON] [T2] Tip for anyone installing 30mm oil pump on vanagon air cooled engine.
> You have to machine one corner of the stock T-1 pump cover off, or use a > flat cover. Not on the vanagon motor. On bay window buses, that is true, for it has a different mount for the engine carrier. But on the vanagon, with the aluminimum bracket that bolts to the case, you need more clearance. I have done it on both motors now, and there is indeed a difference. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.