In a message dated 3/14/04 3:29:35 AM, Oxroad@AOL.COM writes: << Any other ideas to keep from damaging the tie rod end and tie rod end boot for this repair? >> A pickle fork is one of the most misused tools in the box. Even experienced hands often see it as a wedge when in reality it is a pry. If you see the end of your mechanic's pickle fork mushroomed from being pounded home, find a new mechanic. The fork should TAPPED to seat it, then used to PRY the joint apart while rapping on the side of the tapered socket of the housing. The better tool is a tie rod end extractor. It fits around the tie rod end and presses on the stud. I can't say where to buy one because I fashioned my own based on a picture I once saw in a Volvo manual. It works so well that I do not hesitate to break the tie rod end connection. In this case, the gear puller is useless. George |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.