Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2004, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 14 Mar 2004 04:07:16 -0500
Reply-To:     Jonathan Farrugia <jfarrugi@UMICH.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jonathan Farrugia <jfarrugi@UMICH.EDU>
Subject:      Re: tie rod end removal Q
Comments: To: Jeff Oxroad <Oxroad@AOL.COM>
In-Reply-To:  <db.5ac4eb1.2d857153@aol.com>
Content-Type: TEXT/PLAIN; charset=US-ASCII

jeff

robert lilley made a good post on this subject a while back. see the post here:

http://gerry.vanagon.com/cgi-bin/wa.exe?A2=ind0305D&L=vanagon&P=R1418

also note since it doesn't say in the email (it was in one of his previous emails in this thread) that the pullers were purchased from autozone. i just purchased these pullers on friday but have yet to try them out. my autozone was no longer stocking the ampro stuff but had oem brand in the same sizes.

jonathan

On Sun, 14 Mar 2004, Jeff Oxroad wrote:

> I need to separate the tie rod end from the steering knuckle to replace the > boot on the steering rack. I suppose I could use a "pickle fork" to separte the > tie rod end, but my guess is this would ruin the tie rod end boot. > > Is there enough room around the tie rod end to use a gear puller--say maybe a > 4" or 6" type with the two arms or hooks-- to separate the tie rod end from > the knuckle. I don't want to buy the puller if it won't fit in these tight > quarters around the steering knuckle/tie rod end/brake backing plate and aid in > the separation. Any other ideas to keep from damaging the tie rod end and tie > rod end boot for this repair? > > Thanks > Jeff > 83.5 Westy > LA,CA >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.