Date:         Fri, 19 Mar 2004 13:06:56 -0600
Reply-To:     "Weibel, Pius" <weibel@ISGS.UIUC.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Weibel, Pius" <weibel@ISGS.UIUC.EDU>
Subject:      window vent problem
Content-Type: text/plain; charset="us-ascii"

I have a window vent in which the locking mechanism somehow has been
rotated about 20 to 25 degrees counterclockwise (looking out of the
passenger side window).  This means, of course, the stud attached to the
glass has rotated.  The problem is that when the mechanism is in the
locked position, it barely is resting on the vertical post.  Does anyone
know how I can/should rotate the stud 20 to 25 degree clockwise?

 

Pius

85/92 vanajetta or 92/85 jettagon westi

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.