Date:         Sun, 21 Mar 2004 22:33:14 -0500
Reply-To:     Kim Brennan <kimbrennan@MAC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Kim Brennan <kimbrennan@MAC.COM>
Subject:      Re: I need intercooler fan ideas!
Comments: To: David Marshall <vanagon@VOLKSWAGEN.ORG>
In-Reply-To:  <AIEFIGCNNANNIHLNFBPEKEGOLFAA.vanagon@volkswagen.org>
Content-Type: text/plain; charset=US-ASCII; format=flowed

On the Tristar I have, the air intake (stock) was on the right side
(passenger side) and had a cardboard barrier covering the space behind
(actually in front of) the taillight). In addition there is a tube
above that for connecting down to the air filter. This tube goes
through the member support for the cargo deck.

The drivers side has a similar opening (though there is tube, just a
hole)  and there already are vent slits in the side of the tristar.

There is still a gap (about 3cm) between the deck member and the
"normal" top of the engine bay, which you'd have to seal off (it may be
behind some insulating material) if you truly want to seal the
intercooler away from the engine bay.

However, that area >IS< going to be exposed to road dust.


On Mar 20, 2004, at 11:31 PM, David Marshall wrote:

> The idea for the intercooler system is fairly straight forward.  On the
> driver side tail light opening, I am going to install a piece of 3mm
> aluminium sheeting so that it seals that chamber off from the engine
> compartment.  Then I will cut a hole in this sheet metal and mount the
> intercooler to it - making sure the intercooler is air tight to the
> aluminium.