Hi Volks, Well the stumbling is back. I'm starting to get frusterated. Here is what I have done so far. Coil,cap,rotor,wires,plugs,cleaned grounds,injectors utra sonicly cleaned, Scrubbed whole engine, checked for vaccum leaks. When dry runs great but does have alot more power between 3-4k, bogs alittle between 2-3K. Finally the stumbling only happens when it is fully warmed up and wet out, first few mins are always fine and drives good. If I unplug the O2 sensor it will still drive but still skips and stumbles. I'm out of ideas. Any guess on what to check next? Thanks Kevin 87 Westy Burlington VT |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.