Anybody who has had their fiberglass pop top roof off the vehicle, know how to best align the rear hinges? The hinge holes to vanagon are slotted front back about 3/4 inch. and two of the holes in the plate that bolts to the fiberglass top are slotted as well. What are the details in aligning up the top? so I will know where to lock down the rear hinge hardware. Also anybody else notice that the seal that goes around the perimeter of the pop top allows rain to get in the channel? anybody seal this top edge of the U channel on the outside to the top? I am thinking a tiny bead of Black Jack Neoprene sealant. Thanks, Doug |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.