Date:         Wed, 24 Mar 2004 17:44:54 -0500
Reply-To:     Kim Brennan <kimbrennan@MAC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Kim Brennan <kimbrennan@MAC.COM>
Subject:      Re: reverse lights not working,
Comments: To: Wesley Alden Pegden <wes@CS.UCHICAGO.EDU>
In-Reply-To:  <Pine.LNX.4.58.0403241623130.21693@the-400.cs.uchicago.edu>
Content-Type: text/plain; charset=US-ASCII; format=flowed

You can check the backup switch itself.

Hmm, I don't recall an inline fuse on the backup light circuit that is
in the engine compartment. I only had a connector there.

My backup switch died recently had to be replaced. The new ones use a
different connector than the old ones, which will require splicing a
new connector into your wiring harness if that is the issue.

I thought I posted a message on this a couple of months ago, so it
should be in the archive.

On Mar 24, 2004, at 5:24 PM, Wesley Alden Pegden wrote:

> and its not the bulbs.  I tried finding the "line fuse in engine
> compartment" that my haynes manual talks 'bout, but couldn't locate it.
> It would seem funny to me if the fuse blew, but who knows.  What else
> can
> I check?