Date:         Thu, 25 Mar 2004 15:49:58 -0600
Reply-To:     Wesley Alden Pegden <wes@CS.UCHICAGO.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Wesley Alden Pegden <wes@CS.UCHICAGO.EDU>
Subject:      Re: reverse lights not working,
Comments: To: Mike Collum <collum@VERIZON.NET>
In-Reply-To:  <00e401c411fe$7c76c3a0$6701a8c0@DaDell>
Content-Type: TEXT/PLAIN; charset=US-ASCII

Hmmm....
When the van is in reverse, I have 12v going into the switch and coming
out.  Is there anything else you know of that I could try?

Thanks a bunch,
wes

On Wed, 24 Mar 2004, Mike Collum wrote:

> <snip>
> Where exactly is the `backup switch'?
> <snip>
>
> On a manual trans, it's on the driver's side of the transmission just
> forward of the axle
> shaft.  You'll see two wires connected to it.  Remove the wires and unscrew
> the switch to remove it.
>
> Mike
>

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.