Date:         Wed, 7 Apr 2004 17:05:16 -0400
Reply-To:     Kevin <antelopewesty@ADELPHIA.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Kevin <antelopewesty@ADELPHIA.NET>
Subject:      Re: Digitool and driveablity issues
In-Reply-To:  <004f01c41a68$efd32650$3de43f40@korky>
Content-Type: text/plain; charset="iso-8859-1"

Hi Volks,
Almost a happy camper.  I put in my new Throttle position switch and
adjusted it and it is much happier.  Everything on the digitool seems to be
good.  But...  I set the idle with the Idle stailazer and 02 sensor
disconnected (warm temp) and it ran great.  Then I pluged them back in and I
got a bouncing idle again. It drives great 02 sensor is bouncing like it
should.  Great throttle responce smooth all the way through to 4k rpm. Can I
drive it with the 02 sensor pluged in but the Idle stabilzer unpluged will
it hurt anything or just idle crappy when cold? I can try a new isv and iscu
(used) tomorrow but would like to isolate it as that's  my problem. Just a
side note my ISV I cleaned with brake cleaner but I still can blow throught
it should it be clogged like that when cold.  The last one I borrowed you
could blow through a little.
Thanks
Kevin
87 Westy
Burlington VT

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.648 / Virus Database: 415 - Release Date: 3/31/2004