> Anyone know how these bolts could be removed from the block....I remember > some tool my dad use to use for this sort of thing by drilling in the > center of the broken bolt and screwing into it at "tap type" device that > you turn counter clockwise..... I've never had to deal with broken alternator mounting bolts but here are some considerations: The tools you're talking about are called "Easy Outs". I wouldn't attempt to drill into a bolt that's in an aluminum block without using a drill guide ... even a homemade one using hard metal so the drill bit won't wander. I'd start with a small hole (pilot hole) and enlarge it. If the bolts are slightly proud of the surface, I'd try grinding them flat to reduce wander. I'm not a mechanic .... but I did stay at a Holiday Inn Express last night. ; ) Mike |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.