Date:         Fri, 16 Apr 2004 14:03:36 -0400
Reply-To:     "Carrington, Tom" <TCarrington@RELITECH.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Carrington, Tom" <TCarrington@RELITECH.COM>
Subject:      Re: Clutch and Slave stuff
Comments: To: "Bill H." <starfinder88@YAHOO.COM>
Content-Type: text/plain; charset="iso-8859-1"

Sounds like the brake master cylinder is leaking into the brake booster.
When you have the old master cylinder off, use a suction device (turkey
baster has been suggested before) to suck out any residual fluid left in the
booster. The booster is expensive and a PITA to replace, so take care of
it!!

TomC

-----Original Message-----
From: Bill H.
To: vanagon@GERRY.VANAGON.COM
Sent: 4/16/04 12:59 PM
Subject: Re: Clutch and Slave stuff

It never occurred to me but the clutch works just fine and engages at
the
same point. The brakes went mushy yesterday but very quickly went to
nothing.
The pedal hits the floor and no braking pressure. So it's the Master
Brake
Cylinder (again) or that Brake Servo thing. Thanks

Bill H.
88 Silver GL (4 speed)
Pittsburgh

--- jbrush@aros.net wrote:
> Hi Bill,
>
> Since the clutch and the brakes are basically in the same "circuit" of
> fluids,
> if one of those cylinders is failing, your brakes will probably get
mushy,
> maybe
> so slow over time you don't notice. If you do not see signs of fluid
> beneath the
> master cyl, and there is no issue of fluid from the slave cyl, you
will
> have
> trouble figuring out the loss of fluid :-)
>
> Brakes work okay, as in normal? Does the clutch work okay, and is it
> grabbing in
> the same place it always has? >

> John
>





__________________________________
Do you Yahoo!?
Yahoo! Tax Center - File online by April 15th
http://taxes.yahoo.com/filing.html