For those of you with weak or dead rear hatch struts, there is a fix which costs less than $2. If you share with someone, even less. You take a piece of 3/4" diameter PVC pipe and put an 8 3/16" piece on one of the struts and it falls into place when you raise the hatch, holding it in place until you slightly raise the hatch and then let the pipe slide around the large part of the strut as the hatch closes. I didn't think of this. Don't know who did, but the now defunct website of Karl Bloss had an Adobe file explaining how to do it and showing a picture. I have it on both my 84 and 85 Vanagons. I'd rather have good struts, as does my Syncro, but this will work. Is best done when the struts are weakening, not when they are dead so the door won't drop extremely fast. I still have enough pipe for lots of vans as I had to buy an 8 foot piece. I have the file and will email it to all who request it by mid afternoon Friday. Sam -- Sam Walters Baltimore, MD 89 Syncro GL 85 Westy Weekender 84 Vanagon, original owner, soon to be retired, just too many problems All incoming and outgoing email scanned by automatically updated copy of Norton AntiVirus. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.